GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Silverado - 4WD 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Side Door Inside Handle Replacement

Rear Side Door Inside Handle Replacement without SLT


Object Number: 1868362 Size: MF

Callout

Component Name

1

Front Side Door Inside Handle Seal

Procedure

  1. Rotate the front side door inside release handle to full open position.
  2. Use a small pair of 45 degree needle nose pliers to remove the foam seal at the handle to expose retaining clip.
  3. Use a small pair of 45 degree needle nose pliers to release the clip inside the handle.
  4. Remove the pin after the clip is released.

2

Front Side Door Inside Handle

Rear Side Door Inside Handle Replacement with SLT


Object Number: 1694060 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove door window control switch. Refer to Rear Side Door Window Switch Replacement.
  2. Remove door trim panel. Refer to Rear Side Door Trim Panel Replacement.

1

Rear Side Door Inside Handle Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear Side Door Inside Handle Assembly