1

Hood Rear Molding Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten:
1.5 N·m (13 lb in)

2

Hood Rear Molding Assembly Nut (Qty: 2)

3

Hood Rear Molding Integral Clip (Qty: 4)

Tip
Ensure all four clips are fully seated prior to installing the hood rear molding screws.

4

Hood Rear Molding

Tip
Gently pry the hood molding upward, in order to remove.