Hood Front Molding Replacement. Chevrolet Silverado

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Silverado - 4WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Hood Front Molding Replacement

Hood Front Molding Replacement Chevrolet V22

Callout	Component Name
Preliminary Procedure Release the hood in order to access the front hood molding.
1	Hood Front Molding Locator Tab Tip Position the locator tab first into the hood panel center hole followed by the remaining retainers.
2	Hood Front Molding Retainer Clips Tip Secure the retainer clips working from the center of the molding, outward until all the clips are secure to the hood.
3	Hood Front Molding

Callout	Component Name
Preliminary Procedure Release the hood in order to access the front hood molding.
1	Hood Front Molding Locator Tab Tip Position the locator tab first into the hood panel center hole followed by the remaining retainers.

Callout

Component Name

Release the hood in order to access the front hood molding.

Hood Front Molding Locator Tab

Tip
Position the locator tab first into the hood panel center hole followed by the remaining retainers.

Callout	Component Name
Preliminary Procedure Open the hood in order to access and remove the front hood molding.
1	Hood Front Molding Assembly Tip Release the integral retainers from the hood. Upon installation, align the left hand center retainer first into the hood as indicated. Gently secure the remaining retainers working from left to right across the entire hood front molding.

Callout

Component Name

Open the hood in order to access and remove the front hood molding.

Hood Front Molding Assembly

Tip

Release the integral retainers from the hood.
Upon installation, align the left hand center retainer first into the hood as indicated.
Gently secure the remaining retainers working from left to right across the entire hood front molding.