Tools Required

1. Remove the inflatable restraint steering wheel module coil and the inflatable restraint steering wheel module coil wave washer. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement.




Important: DISCARD the old steering shaft lock plate ring.

2. Remove the following parts from the steering shaft:

2.1.	Steering shaft lock plate retaining ring (1) using compressor J 23653-SIR and adapter J 42137 .

2.2.	Turn signal switch cancel cam position plate (2)

2.3.	Turn signal switch cancel cam (3)

Important: Use a NEW steering shaft lock plate retaining ring.

1. Install the following parts onto the steering shaft:

1.1.	Lubricate the turn signal switch cancel cam (3) with GM P/N 12377900 (Canadian P/N 10953529).

1.2.	Turn signal switch cancel cam position plate (2)

1.3.	Steering shaft lock plate retaining ring (1) using compressor J 23653-SIR and adapter J 42137 .

2. Install the inflatable restraint steering wheel module coil and the inflatable restraint steering wheel module coil wave washer. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement.