Preliminary Procedures

1. Remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement.
2. Remove the hood latch. Refer to Hood Primary and Secondary Latch Replacement.
3. Remove the radiator. Refer to Radiator Replacement.
4. Remove auto transmission cooler if equipped. Refer to Transmission Fluid Auxiliary Cooler Replacement.
5. Remove power steering cooler bolt and reposition.
6. Remove the A/C condenser. Refer to Air Conditioning Condenser Replacement.
7. Remove radiator air baffles.
8. Remove the washer bottle. Refer to Windshield Washer Solvent Container Replacement.
9. Remove front impact sensors.
10. Remove PCM bracket bolts and reposition.
11. Remove horn Horn Replacement - Left Side.
12. Disconnect ground from the frame if equipped.
13. Remove the grill mounting bracket. Refer to Hood Stop Bumper Bracket Replacement.
14. Unclip electrical harness from the radiator support.

1

Radiator Support Mount Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
70 N·m (52 lb ft)

2

Radiator Support Mount Bolt (Qty: 2)

Tighten
70 N·m (52 lb ft)

3

Radiator Support

Tip
Transfer any parts as needed.