Preliminary Procedure

1. Remove the fixed antenna, if equipped. Refer to Radio Antenna Replacement.
2. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement.
3. Remove the rear hood seal. Refer to Hood Rear Seal Replacement.
4. Remove the two outer clips securing the air inlet grille panel to the flange on the air plenum.

1

Air Inlet Grille Panel End Panel (Qty: 2)

2

Air Inlet Grille Panel Retainer (Qty: 2)

3

Air Inlet Grille Panel Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.3 N·m (12 lb in)

4

Air Inlet Grille Panel Clip

5

Air Inlet Grille Panel