GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Spark 🢒 Engine 🢒 Engine Controls - 1.0L 🢒 Control Arm Replacement

Removal Procedure

    Object Number: 1222763 Size: SH
  1. Remove the stabilizer shaft. Refer to Stabilizer Shaft Replacement .
  2. Remove the stud bolt (1).
  3. Separate the control arm from the knuckle assembly using a lever (2).

    4. Object Number: 1222812 Size: SH
  4. Remove the bolt (1).
  5. Remove the control arm.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1222818 Size: SH
  1. Install the control arm bolt (2).

    2. Tighten
    Tighten the control arm bolt to 55-70 N·m (41-52 lb ft).

  2. Install the control arm to the knuckle assembly.
  3. Install the stud bolt (1).

    4. Tighten
    Tighten the stud bolt to 50-70 N·m (36-52 lb ft).

  4. Install the stabilizer shaft. Refer to Stabilizer Shaft Replacement .