For 1990-2009 cars only
- Separate the clamps from both the rack and pinion boots.
- Loosen the right and the left tie rod end lock nuts.
- Turn the right and the left tie rod to align the toe.
- Install the rack and pinion boots clamp.
In this adjustment, the right and left tie rods must be equal in length.
Specifications
| • | Front toe-in = 10' ± 10' |
| • | 1/2 rotation number o f tie rod--Difference of toe-in is 07.5 mm (0.03 in) |
| • | 1 rotation number of tie rod-Difference of toe-in is 1.5 mm (0.06 in) |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the tie rod end lock nut to 45 N·m
(33 lb ft).
