- Release the parking brake.
Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Check the wheel
bearing play by moving the top and the down of the tire in an in-and-out motion.
Specification
The rear wheel bearing play is 0 mm
(0 in).
- If the bearing play is high, tighten the castellated nut.
- If the bearing play is high after tightening, replace the wheel bearing.
Rear Wheel Bearing Free Load
- Release the parking brake.
Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.
- Raise and support the vehicle and rotate the wheel. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the wheels.
- Check the torque when the hub moves by a spring scale.
Specification
The standard-no load is 0.137-0.422 N·m
(0.9-3.7 lb in).
- If the checked
torque exceeds the specification, tighten the castellated nut.
- If the checked torque exceeds the specification after tightening, replace
the wheel bearing.