Circuit Description
This fault code may happen when the resetting procedure is not practiced in case of line assembling or servicing the hydraulic control module (HCM).
Conditions for Running the DTC
This fault code is not the fault and there is no cause in the system.
Conditions for Setting the DTC
The warning lamp is ON.
Action Taken When the DTC Sets
The antilock brake system (ABS) is disabled and the ABS warning lamp is turned ON. The proportioning is operation.
The proportioning function is OK.
Diagnostic Aids
The system is OK when the fault code is cleared with the scan tool.
Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Antilock Brake System Schematics Connector End View Reference: Antilock Brake System Connector End Views | |||
1 | Does this vehicle experience the ABS operation? | Go to Step 3 | Go to Step 2 |
2 | This fault code is not the fault. | System OK | -- |
3 | Does the brake system bleed and refill the brake fluid? | Go to Step 5 | Go to Step 4 |
4 | Bleed the brake system and refill the brake fluid. Is the repair complete? | System OK | -- |
5 |
Is the repair complete? | System OK | -- |
