- Install
the 3rd gear synchronizer ring (1).
Important: Coat the inner parts: gear, bearing, oil seal etc., with gear fluid.
- Install the 3rd gear bearing (2).
- Install
the 3rd-4th synchronizer springs to the hub.
Important: In case of assembling the synchronizer sleeve and the hub, let A=B.
- Install the 3rd-4th synchronizer key to the hub.
- Install the 3rd-4th hub (2) to the sleeve (1).
Important: Position the longer flange of the hub toward the 3rd gear and match the key
and the ring groove.
- Insert the 3rd-4th hub assembly into the input shaft (2).
- Install the 3rd-4th hub assembly using a hammer and the DT 46496
(1).
Important: Do not overpress when installing the gear bearing and hub assembly. If overpressed,
the gear, teeth may be damaged.
- When installing gear, bearing and hub assembly, install them slowly using the DT 46496
and a hammer. If overpressed,
the gear teeth may be damaged.
Important: Match the ring groove to the key of hub.
- Install the 3rd-4th synchronizer clip.
- Install
the input shaft 4th gear bearing (2) and the 4th gear (1).
- Install
the 5th gear spacer (2) using the DT 46495
(1) and a hammer.
- Install the 3rd-4th Input shaft left side bearing using the DT 46495
and a hammer.
- Install
the input shaft right side bearing to the input shaft using the DT 46495
and a hammer (1).
- Install the gear unit. Refer to
Transmission Replacement
.