For 1990-2009 cars only
Removal Procedure
- Remove the fluid reservoir by pulling it upward (1).
- Disconnect the supply line hose by loosening the hose clamp (3).
- Remove the reservoir cap (1).
- Catch the escaping fluid in a drain pan.
- Disconnect the fluid return hose by loosening the hose clamp (2).
- Plug the openings of both hoses to prevent the fluid loss and contamination.
Installation Procedure
- Connect both hoses and secure the hose clamps.
- Fill the fluid reservoir with power steering fluid.
- Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system. Refer to Power Steering System Bleeding .
Notice: Refer to Power Steering Required Fluid Notice in the Preface section.
