GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Spark 🢒 General Information 🢒 General Information 🢒 Turn Signal Lamp Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1225076 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the front bumper spacer. Refer to Front Bumper Upper Fascia Replacement in Bumpers.
  3. Disconnect the turn signal lamp electrical connector (1).
  4. Remove the turn signal lamp screw (3).
  5. Remove the turn signal lamp assembly (2).
  6. Remove the turn signal lamps from the front bumper spacer.

Installation Procedure

    Object Number: 1225077 Size: SH
  1. Connect the electrical connector.
  2. Install the turn signal lamp assembly with the screw.
  3. Install the front bumper spacer. Refer to Front Bumper Upper Fascia Replacement in Bumpers.
  4. Connect the negative battery cable.