GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Spark 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure

    Caution: Refer to Fuel and Evaporative Emission Pipe Caution in the Preface section.

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1225023 Size: SH

    Caution: Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:

       • Use forced air ventilation such as a fan set outside of the trunk.
       • Plug or cap any fuel system openings in order to reduce fuel vapor formation.
       • Clean up any spilled fuel immediately.
       • Avoid sparks and any source of ignition.
       • Use signs to alert others in the work area that fuel system work is in process.

  1. Disconnect the negative battery cable.
  2. Remove the canister bolt (1) and nut, and remove the cover (2).

    3. Object Number: 1224968 Size: SH
  3. Disconnect the canister hoses (3).
  4. Remove the evaporative emission canister (4).

Installation Procedure

    Object Number: 1224968 Size: SH
  1. Install the evaporative emission canister (4).
  2. Connect the canister hoses (3).
  3. Install the canister cover.
  4. Connect the negative battery cable.