GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1618010  Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the front wheel speed sensor electrical connector (1).
  3. Caution: Refer to Vehicle Lifting Caution in the Preface section.

  4. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  5. Remove the wheel. Refer to Tire and Wheel Removal and Installation .

  6. Object Number: 1618012  Size: SH
  7. Remove the bolts (1) and the front wheel speed sensor (2) from the steering knuckle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1618012  Size: SH
  1. Install the front wheel speed sensor (2) to the steering knuckle. Secure it with the bolts (1).
  2. Tighten
    Tighten the front wheel speed sensor bolt to 23 N·m (17 lb ft).

  3. Install the wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.

  5. Object Number: 1618010  Size: SH
  6. Connect the front wheel speed sensor electrical connector (1).
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .