Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the instrument panel assembly. Refer to
Instrument Panel Assembly Replacement
.
- Remove the defroster duct hose from the tie-bar.
- Remove the steering column. Refer to
Steering Column Replacement
in Steering Wheel and Column .
- Remove the electrical wiring harness strip.
- Disconnect the electrical wiring harness.
- Remove the defroster duct.
- Remove the bolts and the tie-bar.
- Remove the bolts and the tie-bar center.
Installation Procedure
Caution: Refer to Fastener Notice in the Preface section.
- Install the tie-bar with the bolts.
Tighten
Tighten the bolts to 13 N·m (115 in lb).
- Install the tie-bar center with the bolts.
Tighten
Tighten the bolts to 13 N·m (115 in lb).
- Install the defroster duct to the upper air inlet grille panel.
- Connect the electrical wiring harness.
- Bind the electrical wiring harness strip.
- Install the steering column. Refer to
Steering Column Replacement
in Steering Wheel and Column.
- Install the defroster duct hose.
- Install the instrument panel assembly. Refer to
Instrument Panel Assembly Replacement
.
- Connect the negative battery cable.