GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Spark 🢒 Engine 🢒 Engine Electrical 🢒 Front Bumper Fascia Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the negative battery cable.

    2. Caution: Refer to Vehicle Lifting Caution in the Preface section.

  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  3. Remove the front wheels. Refer to Tire and Wheel Removal and Installation.
  4. Remove the front fender liner. Refer to Fender Liner Replacement.

    5. Object Number: 1619039 Size: SH
  5. Remove the bolts (1) on both side of the fascia.

    6. Object Number: 1223312 Size: SH
  6. Remove the clips (1) under the fascia.

    7. Object Number: 1619040 Size: SH
  7. Lower the vehicle.
  8. Remove the front bumper fascia bolts (1).
  9. Remove the clips (1).
  10. Remove the front bumper fascia (2).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1619040 Size: SH
  1. Install the bumper fascia (2).
  2. Install the clips on the top of the fascia (1).

    3. Caution: Refer to Vehicle Lifting Caution in the Preface section.


    Object Number: 1223316 Size: SH
  3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  4. Install the clips (1) under the fascia.

    5. Object Number: 1619039 Size: SH
  5. Install the bolts (1) on both sides of the fascia.
  6. Install the front fender liner. Refer to Fender Liner Replacement.
  7. Install the front wheels. Refer to Tire and Wheel Removal and Installation.
  8. Lower the vehicle.
  9. Connect the negative battery cable.