For 1990-2009 cars only
Removal Procedure
- Loosen the brake pipe fittings-to-proportioning valve (1).
- Remove the proportioning valve (2).
- Plug the opening in the proportioning valve and brake pipe fitting to prevent fluid loss or contamination.
- Remove the proportioning valve.
Caution: Refer to Brake Fluid Irritant Caution in the Preface section.
Notice: Avoid spilling brake fluid onto painted surfaces, electrical connections, wiring, or cables. Brake fluid will damage painted surfaces and cause corrosion to electrical components. If any brake fluid comes in contact with painted surfaces, immediately flush the area with water. If any brake fluid comes in contact with electrical connections, wiring, or cables, use a clean shop cloth to wipe away the fluid.
Installation Procedure
- Install the proportioning valve (1).
- Install the brake pipe fitting (2).
- Bleed the brake system. Refer to Hydraulic Brake System Bleeding .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the proportioning valve to 22 N·m (16 lb ft).
Tighten
Tighten the brake pipe fitting-to-proportioning valve to 16 N·m (12 lb ft).
