GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Spark 🢒 Safety and Security 🢒 Theft Deterrent 🢒 Theft Deterrent Alarm Replacement

Removal Procedure

    Object Number: 1617991 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the siren electrical connector.
  4. Remove the siren bracket mounting bolt and siren.

Installation Procedure

    Object Number: 1617991 Size: SH
  1. Install the siren with the mounting bolt.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Connect the electrical connector.

    3. Tighten
    Tighten the siren mounting bolt to 8 N·m (71 lb in).

  3. Lower the vehicle.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .