GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Spark 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Intake Air Temperature Sensor Replacement

Removal Procedure

    Object Number: 1225000 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature (IAT) sensor connector (1).
  3. Disconnect the IAT sensor.
  4. Remove the IAT sensor (2).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1224971 Size: SH
  1. Install the IAT sensor and tighten to 20-30 N·m (15-22 lb ft).
  2. Connect the IAT sensor connector (1).
  3. Connect the negative battery cable.