For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Remove the air cleaner assembly.
- Disconnect the crankshaft position (CKP) sensor connector.
- Remove the CKP sensor retaining bolt.
Warning: Refer to Battery Disconnect Warning in the Preface section.
Installation Procedure
- Install the CKP sensor and bolts and tighten to 5-8 N·m (44-71 lb in).
- Connect the CKP sensor connector.
- Install the air cleaner assembly.
- Connect the negative battery cable.
Caution: Refer to Fastener Caution in the Preface section.
