GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Spark 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure

    Warning: Refer to Fuel and Evaporative Emission Pipe Warning in the Preface section.

    Warning: Refer to Gasoline/Gasoline Vapors Warning in the Preface section.

    Warning: Refer to Safety Goggles and Fuel Warning in the Preface section.


    Object Number: 1224217 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the evaporative emission (EVAP) canister purge solenoid connector.
  3. Disconnect the vacuum hoses from the EVAP canister purge solenoid.
  4. Unclip the EVAP emission canister purge solenoid from the mounting bracket.

Installation Procedure

    Object Number: 1224217 Size: SH
  1. Clip the EVAP emission canister purge solenoid to the mounting bracket.
  2. Connect the vacuum hoses to the EVAP canister purge solenoid.
  3. Connect the EVAP emission canister purge solenoid connector.
  4. Connect the negative battery cable.