GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Spark 🢒 Brakes 🢒 Drum Brakes 🢒 Wheel Cylinder Replacement

Removal Procedure

    Object Number: 1282389 Size: SH
  1. Remove the brake drum. Refer to Brake Drum Replacement.
  2. Remove the brake shoe upper spring (1).
  3. Widen the leading shoe and trailing shoe (2).
  4. Remove the wheel cylinder.

    5. Object Number: 1282391 Size: SH

    Warning: Brake fluid may irritate eyes and skin. In case of contact, take the following actions:

       • Eye contact--rinse thoroughly with water.
       • Skin contact--wash with soap and water.
       • If ingested--consult a physician immediately.

  5. Disconnect the brake line fitting (1).
  6. Plug the opening in the brake line to prevent fluid loss or contamination.
  7. Remove the wheel cylinder-to-backing plate bolt (2).

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1282392 Size: SH
  1. Install the wheel cylinder to the backing plate with the wheel cylinder bolt (2) and tighten to 10 N·m (89 lb in).
  2. Connect the brake line fitting (1) and tighten to 16 N·m (12 lb ft).
  3. Install the brake shoe. Refer to Brake Shoe Replacement.
  4. Install the brake drum. Refer to Brake Drum Replacement.