GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Tahoe 4WD - RHD 🢒 Restraints 🢒 Seat Belts 🢒 Driver or Passenger Seat Belt Buckle Replacement

Removal Procedure
  1. Disconnect the negative battery cable.
  2. Disconnect the seat buckle electrical connector, if equipped.

    3. Object Number: 293509 Size: SH
  3. Remove the bolt from the floor pan.
  4. Remove the seat buckle from the floor pan.
  5. Remove the seal from the floor pan.

Installation Procedure

    Object Number: 293509 Size: SH
  1. Install the seal and the seat buckle to the floor pan with the bolt.

    2. Tighten
    Tighten the front seat belt buckle anchor bolt to 55 N·m (41 lb ft).

  2. Connect the seat buckle electrical connector, if equipped.
  3. Connect the negative battery cable.

    4. Tighten
    Tighten the negative battery cable bolt to 17 N·m (13 lb in).