For 1990-2009 cars only
- Remove the bulb assembly from the headlamp capsule by reaching into the engine compartment and twisting the bulb assembly to the left.
- Remove the screws from the radiator support.
- Carefully pull the headlamp assembly forward.
- Disconnect the electrical connector from the burned out bulb assembly.
Notice: Make sure the headlamp switch is turned off before beginning the repair procedure.
Notice: Avoid touching the bulb or letting it come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when it is turned on. If contact with the bulb occurs, clean the bulb with alcohol or a suitable degreaser and wipe it dry.
Installation Procedure
- Install the new bulb assembly into the headlamp assembly and twist it clockwise until the connector is facing down.
- Connect the electrical connector to the bulb assembly.
- Install the headlamp assembly.
- Install the screws through the top of the radiator support.
- Use the screws in order to secure the headlamp assembly.
Notice: Make sure to replace a high beam bulb with a high beam and a low beam bulb with a low beam.
