Removal Procedure
- Disconnect the negative battery cable.
- Remove the wiper arm assemblies. Refer to
Windshield Wiper Arm Replacement
.
- Remove the cowl vent grille.
- Disconnect the electrical connector from the motor assembly.
Important: Do not remove the crankarm.
- Remove the drive link brackets from the wiper motor crank arm.
- Loosen the nuts. Slide the brackets off the crank arm.
- Remove the wiper motor screws and the wiper motor assembly from the
vehicle.
Installation Procedure
- Install the wiper motor assembly to the vehicle.
- Install the wiper motor screws.
Tighten
Tighten the wiper motor screws to 7 N·m (62 lb in).
- Install the drive link brackets to the wiper motor crank arm.
- Install the nuts to the wiper motor crank arm.
Tighten
Tighten the drive link nuts to 5 N·m (44 lb in).
- Connect the electrical connector to the wiper motor.
- Install the cowl vent grille.
- Install the wiper arm assemblies. Refer to
Windshield Wiper Arm Replacement
.
- Connect the negative battery cable.