Fog Lamp Switch Replacement for Chevrolet Tahoe Limited 2000

1. Remove the IP cluster trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gauges and Console.



2. Remove the fog lamp switch connector.



3. Remove the fog lamp switch from the bezel by pressing in on the two tabs on each side of the switch behind the bezel.

1. Install the fog lamp switch to the bezel.
2. Install the fog lamp switch connector.



3. Install the IP cluster trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel Gauges, and Console.