GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Tahoe - 2WD 🢒 Transmission/Transaxle 🢒 Manual Transmission - New Venture 🢒 Shift Lever Replacement

Removal Procedure
  1. Remove four screws and the shift boot trim plate securing the shift tower boot to the floor panel and the insulator.

    2. Object Number: 102874 Size: SH

    Important: Do not disassemble the transmission shift housing. Internal parts for the shift housing are not available. Opening the shift housing will void the shift housing warranty.

  2. Remove the shift lever from the transmission shift housing lever.
  3. Remove the boot from the shift lever.

Installation Procedure
  1. Install the boot to the shift lever.

    2. Object Number: 102874 Size: SH
  2. Install the shift lever to the transmission shift tower lever.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the four screws securing the shift housing boot to the floor panel and the insulator.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the shift boot trim plate and screws.