Air Cleaner Assembly

Removal Procedure

1. Remove the duct assembly.



2. Remove the bolt.



3. Remove the air intake duct.

To release air intake duct from the front fender, depress the 2 ears inward.

4. Remove the air cleaner assembly with the bracket.

Pivot the air cleaner in an upward direction to release the top barb on the intake duct.

Installation Procedure

1. Install the air cleaner assembly with the bracket.
2. Install the air intake duct.



3. Install the bolt.

Tighten
Tighten the bolt to 18 N·m (13 lb ft).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




4. Install the duct assembly.

Air Cleaner Adapter / Resonator

Removal Procedure

1. Remove the wingnut.



2. Remove the adapter / resonator assembly.

Pull and twist up on the front of the adapter to release the adapter / resonator assembly from the throttle body.

Installation Procedure

1. Install the adapter/resonator assembly.



2. Install the wingnut.

Tighten
Tighten the wingnut to 2 N·m (18 lb in).

Air Cleaner Resonator and Duct Assembly

Removal Procedure

1. Remove the nut.
2. Loosen the duct resonator clamp.
3. Remove the resonator.



4. Loosen the duct assembly clamps.
5. Remove the duct assembly.

Installation Procedure

1. Install the duct assembly.
2. Tighten the duct assembly clamps.



3. Install the resonator.
4. Tighten the duct resonator clamp.
5. Install the nut.

Tighten
Tighten the nut to 5 N·m (46 lb in).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Air Cleaner Air Intake Duct

Removal Procedure

1. Remove the retainer.
2. Remove the screw.



3. Remove the air intake duct

Installation Procedure

1. Install the air intake duct.



2. Install the screw.

Tighten
Tighten the screw 2 N·m (18 lb in).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the retainer.