The 4L80-E is a fully automatic rear wheel drive electronically
controlled transmission. The 4L80-E provides four forward ranges including
overdrive and reverse. A gear type of oil pump controls shift points. The
VCM/PCM and the pressure control (PC) solenoid (force motor) regulate these
shift points. The VCM/PCM also controls shift schedules and TCC apply rates.
Transmission temperature also influences shift schedules and TCC apply rates.
You can operate the transmission in any one of the following seven modes:
| • | P - PARK position prevents the vehicle from rolling either
forward or backward on vehicles less than 15,000 G.V.W. For safety reasons,
use the parking brake in addition to the park position. |
| • | R - REVERSE allows the vehicle to be operated in a rearward
direction. |
| • | N - NEUTRAL allows the engine to be started and operated
while driving the vehicle. If necessary, you may select this position in order
to restart the engine with the vehicle moving. |
| • | OD - OVERDRIVE is used for all normal driving conditions.
Overdrive provides four gear ratios plus a converter clutch operation. Depress
the accelerator in order to downshift for safe passing. |
| • | D - DRIVE position is used for city traffic, and hilly terrain.
Drive provides three gear ranges. Depress the accelerator in order to downshift. |
| • | 2 - Manual SECOND provides acceleration and engine braking
or greater traction from a stop. When you choose manual SECOND, the vehicle
will start out in first gear and upshift to second gear. You may select this
gear at a vehicle speed of up to 22 km/h (35 mph). |
| • | 1 - Manual LOW provides maximum engine braking. You may
select this gear at a vehicle speed of up to 13 km/h (20 mph). |
