For 1990-2009 cars only
Checks | Cause | ||||||
|---|---|---|---|---|---|---|---|
(Rear Lube Components) | |||||||
Cooler Circuit | Blocked or leaking | ||||||
Spacer Plate/Gasket | A hole is missing | ||||||
Lube Pipe (39) |
| ||||||
Valve Body (301) | Loose, broken, or missing bolts | ||||||
Inline Filter | Blocked | ||||||
Output Shaft Seal (20) |
| ||||||
Main Shaft (662) | Lube holes are missing or the holes are blocked | ||||||
Center Support (640) |
| ||||||
Apply Pin (55) |
| ||||||
Piston (58) | Binding in the case | ||||||
Snap Ring (642) | Not seated. | ||||||
Sun Gear Shaft (649) |
| ||||||
Rear Gear set | The bearing surface is worn | ||||||
Main Shaft (662) | The lube holes are plugged | ||||||
(In 2nd, 3rd, and 4th) | |||||||
Rear Band (657) | Locked On | ||||||
Rear Servo Pin (73) | Too long or binding in the case | ||||||
Piston (65) | Binding in the case | ||||||
