Front Floor Console Replacement Base

1. Remove the front tray (4) from the compartment.
2. Remove the storage bin.
3. Remove the two bolts (2).
4. Remove the storage compartment (1).

1. Install the storage compartment (1).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the two bolts (2).

Tighten
Tighten the storage compartment bolts to 6 N·m (53 lb in).

3. Install the storage bin.
4. Install the front tray (4).

Front Floor Console Replacement Luxury

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Remove the negative battery cable.



2. Remove the console trim plate. Refer to Console Trim Plate Replacement .



3. Remove the console to floor bolts.
4. Remove one of the front bucket seats. Refer to Front Seat Replacement - Bucket Bucket Seat Replacement in Seats.



5. Disconnect the IP harness (1) and the cross body harness (5) connectors from the console.
6. Remove the console by sliding rearward and lifting out of the vehicle.

1. Install the console to the vehicle by sliding forward and onto the bracket.
2. Connect the IP harness (1) and the cross body (5) harness in the console.
3. Install the front bucket seat. Refer to Front Seat Replacement - Bucket In Seats.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the console to floor bolts in order of 3,4,1,2.

Tighten
Tighten the bolts to 6 N·m (53 lb in).




5. Install the console trim plate. Refer to Console Trim Plate Replacement .
6. Install the negative battery cable.