GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Tahoe - 2WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 236/246-NP8 (Two Speed Automatic) 🢒 Transfer Case Shift Control Switch Replacement

Removal Procedure

    Object Number: 348730 Size: SH
  1. Remove the instrument panel bezel trim piece. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.

    2. Object Number: 396838 Size: SH
  2. Pull the tabs on the side of the transfer case driver control switch out.
  3. Pull the transfer case driver control switch straight out from the panel.

Installation Procedure

    Object Number: 396838 Size: SH

    Important: Make sure that the transfer case control switch is seated properly in the instrument panel before installing the instrument panel trim bezel.

  1. Install the transfer case driver control switch into the instrument panel.

    2. Object Number: 348730 Size: SH
  2. Install the instrument panel trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.