Diagnostic Aids
If the clutch release is noisy with the clutch fully engaged or during engagement, you will also need to check the release bearing for burrs, nicks.
Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
-
This step explains there parts and the operation of the clutch system.
-
This step inspects for damage or worn parts.
Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
DEFINITION: The clutch release bearing is noisy with the clutch fully engaged or during engagement. | |||||||||
Did you review the clutch symptom operations and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Clutch | |||||||
2 |
Is the release bearing worn? | Go to Step 3 | Go to Step 4 | ||||||
3 | Replace the release bearing in the clutch actuator. Refer to Clutch Concentric Actuator Cylinder Replacement . Is the clutch release bearing still noisy? | Go to Step 4 | System OK | ||||||
4 | Inspect the clutch release bearing for binding. Is the release bearing binding on the transmission bearing retainer? | Go to Step 5 | System OK | ||||||
Inspect for weak linkage return spring. Is the return spring weak? | Go to Step 6 | System OK | |||||||
6 | Replace the return spring. Refer to Clutch Assembly Replacement . Did you find and repair the condition? | Go to Step 7 | Go to Diagnostic Aids | ||||||
7 |
Did you correct the condition? | System OK | Go to Step 1 | ||||||
