GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Tahoe - 2WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Endgate Hinge Replacement

Removal Procedure
  1. Remove the endgate. Refer to Endgate Replacement .

    2. Object Number: 354684 Size: SH
  2. Remove the endgate hinge bolts.
  3. Remove the hinge.

    4. Object Number: 354616 Size: SH
  4. Remove the body side hinge bolts.
  5. Remove the hinge from the vehicle.

Installation Procedure

    Object Number: 354616 Size: SH
  1. Install the body side hinge to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the body side hinge bolts.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).


    Object Number: 354684 Size: SH
  3. Install the endgate hinge to the vehicle.
  4. Install the endgate hinge bolts.

    5. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  5. Install the endgate. Refer to Endgate Replacement .