GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Tahoe - 2WD 🢒 General Information 🢒 Maintenance and Lubrication 🢒 Passenger Compartment Air Filter Replacement

Removal Procedure

    Object Number: 687390 Size: SH
  1. If equipped, remove the IP sound insulator. Refer to Instrument Panel Insulator Replacement in Body and Accessories.
  2. Remove the filter access door screw.
  3. Remove the filter access door (1) from the HVAC module.
  4. Remove the passenger compartment air filter (2).

Installation Procedure

    Object Number: 687390 Size: SH
  1. Install the passenger compartment air filter (2).
  2. Install the filter access door (1) to the HVAC module.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the filter access door screw.

    4. Tighten
    Tighten the screw to 1.6 N·m (14 lb in).

  4. If equipped, install the IP sound insulator. Refer to Instrument Panel Insulator Replacement in Body and Accessories.