GM Service Manual Online
For 1990-2009 cars only

Clutch Pilot Bearing Removal C/K/C3500HD

Tools Required

J 43276 Clutch Pilot Bearing Remover


    Object Number: 373133  Size: SH

    Caution: Wear safety glasses in order to avoid eye damage.

    Notice: When using the J 43276 Clutch Pilot Bearing Remover, always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so causes damage to the J 43276-1 tool body.

  1. Remove the clutch pilot bearing using the J 43276 .
  2. 1.1. Install the J 43276-1 tool body into the clutch pilot bearing.
    1.2. Using a wrench secure the J 43276-1 tool body.
    1.3. Insert the J 43276-2 forcing screw into the J 43276-1 tool body.
    1.4. Rotate the J 43276-2 forcing screw clockwise into the J 43276-1 tool body until the clutch pilot bearing is completely removed from the crankshaft.
    1.5. Rotate the J 43276-2 forcing screw counterclockwise to remove the J 43276-2 forcing screw from the J 43276-1 tool body.
    1.6. Remove the J 43276-1 tool body from the clutch pilot bearing.
  3. Discard the clutch pilot bearing.

Clutch Pilot Bearing Removal Medium Duty

Tools Required

J 23907 Slide Hammer


    Object Number: 375105  Size: SH

    Caution: Wear safety glasses in order to avoid eye damage.

  1. Remove the clutch pilot bearing using the J 23907 .
  2. Discard the clutch pilot bearing.
  3. Inspect the engine flywheel clutch pilot bearing bore for serviceability.