GM Service Manual Online
For 1990-2009 cars only

Tweeter Speaker Rattle in Front Side Door(s), Tweeter Speaker Falls Out of Position (Modify Door Trim Panel and/or Add Grommets and Replace Tweeter Speaker)

Subject:Tweeter Speaker Rattle in Front Side Door(s), Tweeter Speaker Falls Out of Position (Modify Door Trim Panel and/or Add Grommets and Replace Tweeter Speaker)

Models:1999-2003 Chevrolet Silverado Pickup Models
2000-2003 Chevrolet Tahoe, Suburban
2002-2003 Chevrolet Avalanche
1999-2003 GMC Sierra Pickup Models
2000-2003 GMC Yukon, Yukon XL
with Uplevel Audio System (Non-Bose®) (RPO UQ3)



Condition

Some customers may comment on a rattle noise in either front side door or that the upper tweeter speaker has fallen out of position.

Cause

A material incompatibility between the door trim and the door tweeter speaker may cause this condition. Over time, the two posts used to attach the tweeter to the door trim may fracture.

Correction

New grommets have been released that will be placed over the tweeter speaker posts to isolate the two materials and correct this condition. Grommets will have to be attached to the current stock of tweeter part numbers. The new tweeters will have the two grommets already attached to the posts.

Replace the tweeter speaker and add grommets as necessary. The door trim panel post holes for any tweeter part number will have to be slightly enlarged to accommodate the grommets.

Use the following procedure and refer to the Parts Information for the applicable speaker parts/usage.

  1. Remove the front door trim panel. Refer to the Trim Panel Replacement - Side Front Door procedure in the Doors sub-section of SI.
  2. Remove the speaker grille. Refer to the Speaker Grille Replacement - Front Door procedure in the Entertainment sub-section of SI.
  3. Remove the tweeter speaker retaining nuts.
  4. Remove the speaker from the door trim panel.

  5. Object Number: 1284410  Size: SH
  6. Enlarge the two tweeter speaker mounting holes in the door trim panel to 9.525 mm (0.375 in) (3/8 in). This will accommodate the grommets. This step is required before the installation of any tweeter part number.

  7. Object Number: 1284412  Size: SH
  8. If replacement tweeter speaker P/N is 15772411 or 15071121, attach one grommet (3), P/N 15204327, to each of the speaker posts.
  9. Position the speaker (4) into the opening in the door trim panel (2).
  10. Install the tweeter speaker retaining nuts (1).
  11. Tighten
    Tighten to 1.6 N·m (14 lb in).

  12. Install the speaker grille. Refer to the Speaker Grille Replacement - Front Door procedure in the Entertainment sub-section of SI.
  13. Install the front door trim panel. Refer to the Trim Panel Replacement - Side Front Door procedure in the Doors sub-section of SI.

Parts Information

Part Number

Description

Usage/Qty

15772411

(current design)

Speaker Asm., RDO Frt S/D Ctr (Tweeter)

1999-2002 Models

(will require 2 grommets, P/N 15204327)

15071121

(current Design)

Speaker Asm., RDO Frt S/D Ctr (Tweeter)

2003 Models

(will require 2 grommets, P/N 15204327)

15204328

(new design)

Speaker Asm., RDO Frt S/D Ctr (Tweeter)

1999-2002 Models

(grommets attached)

15204326

(new design)

Speaker Asm., RDO Frt S/D Ctr (Tweeter)

2003 and Newer Models

(grommets attached)

15204327

Grommet, RDO Frt S/D Ctr (Tweeter)

Use with P/Ns 15772411 and 15071121

Parts are expected to be available 7-17-2003 from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

R0945

Speaker, Radio - Replace (Left Front Tweeter)

0.3 hr

R0944

Speaker, Radio - Replace (Right Front Tweeter)

0.3 hr

Add:

To enlarge door trim speaker mounting holes and/or attach grommets to speaker

0.2 hr