GM Service Manual Online
For 1990-2009 cars only

Front Bumper Filler Replacement Old Style

Removal Procedure

  1. Remove the front grille. Refer to Grille Replacement .

  2. Object Number: 373577  Size: SH
  3. Disconnect the electrical connector from the fog lamps, if equipped.

  4. Object Number: 379248  Size: SH
  5. Remove the retaining bolts (1, 2) from the front bumper.
  6. Remove the brace bolt (3) from the front bumper.
  7. Remove the front bumper assembly from the vehicle.
  8. Remove the air deflector from the bumper if necessary. Refer to Front Bumper Fascia Air Deflector Replacement .
  9. Remove the fog lamps, if equipped. Refer to Front Fog Lamp Replacement .

  10. Object Number: 869920  Size: SH
  11. Remove the S-clip securing the bumper filler panel to the wheelhouse splash shield.
  12. Remove the fastener securing the filler panel to the radiator support.
  13. Remove the fastener securing the filler panel to the headlamp bracket.
  14. Remove the bumper filler from the vehicle.

Installation Procedure


    Object Number: 869920  Size: SH
  1. Install the bumper filler from the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fasteners securing the filler panel to the headlamp bracket and the radiator support.
  4. Tighten
    Tighten the filler panel to the headlamp bracket and the radiator support to 9 N·m (80 lb in).

  5. Install the fog lamps, if equipped. Refer to Front Fog Lamp Replacement .
  6. Install the air deflector to the bumper if necessary. Refer to Front Bumper Fascia Air Deflector Replacement .
  7. Position the front bumper assembly on the vehicle.

  8. Object Number: 379248  Size: SH

    Important: Tighten the bolts in the following sequence.

  9. Install the retaining bolts (1, 2) to the front bumper.
  10. Tighten

    1. Tighten the bracket bolt (1) to 85 N·m (63 lb ft).
    2. Tighten the bracket bolt (2) to 85 N·m (63 lb ft).
    3. Tighten the brace bolt to 55 N·m (41 lb ft).

    Object Number: 373577  Size: SH
  11. Connect the electrical connector to the fog lamps, if equipped.
  12. Install the front grille. Refer to Grille Replacement .