Removal Procedure
- Apply the parking brake to prevent the vehicle from moving.
- If equipped with an automatic transmission, move the shift lever
all the way down to last gear.
- Tilt the steering wheel to the full down position.
- Pull gently rearward on
the corners of the bezel from the instrument panel (IP) assembly.
- Remove the bezel.
Installation Procedure
- Position the bezel to
the IP assembly.
- Attach the bezel to the IP assembly by pushing gently on the bezel
till it is in place.
- Ensure all clips are in place.
- Tilt the steering wheel to the normal drive position.
- If equipped with an automatic transmission, move the shift lever
to the park position.
- Disengage the parking brake.