GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Tahoe - 2WD 🢒 Roof 🢒 Sunroof 🢒 Sunroof Window Height and Opening Fit Adjustment

Sunroof Window Height and Opening Fit Adjustment for Chevrolet Tahoe - 2WD 2007

Window Height Set
  1. Slide the sunroof sunshade to the open position.
  2. Remove the sunroof panel side covers. Refer to Sunroof Panel Side Opening Closeout Cover Replacement .
  3. Cycle the sunroof to the fully closed position.
  4. Loosen the sunroof window panel screws.

    5. Object Number: 1685761 Size: SH
  5. Individually adjust the 4 corners of the sunroof window panel.
  6. Adjust the front of the sunroof window panel to 0.0 -- 1.0 mm (0.040 in) below the top surface (3) of the roof panel.
  7. Adjust the rear of the sunroof window panel to 1.0+0.0 mm (0.040 in) above the top surface (2) of the roof panel.

    8. Notice: Refer to Fastener Notice in the Preface section.

  8. Tighten the sunroof window panel screws.

    9. Tighten
    Tighten the sunroof window panel screws to 4 N·m (35 lb in).

  9. Install the sunroof panel side covers. Refer to Sunroof Panel Side Opening Closeout Cover Replacement .
  10. Close the sunshade.