GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Tahoe - 2WD 🢒 Engine 🢒 Engine Electrical - Hybrid (HP2) 🢒 Battery Current Sensor Replacement

Removal Procedure

    Object Number: 1968028 Size: SH
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement.
  2. Mark the location of the negative battery cable clip (1) and remove the clip from the cable.
  3. Mark the location of the battery current sensor (2) on the battery cable with tape for reference during installation.
  4. Remove the tape securing the battery current sensor to the negative battery cable.
  5. Squeeze the negative battery cable branches together.

    6. Note: Note the orientation of the battery current sensor prior to removal.

  6. Slide the battery current sensor (2) off of the negative battery cable.

Installation Procedure

    Object Number: 1968028 Size: SH
  1. Squeeze the negative battery cable branches together.

    2. Note: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.

  2. Slide the NEW battery current sensor (2) up onto the negative battery cable to the location previously marked during removal.
  3. Wrap electrical tape around the battery current sensor leg in order to secure the sensor to the negative battery cable.
  4. Install the negative battery cable clip (1) to the cable to the location previously marked during removal.
  5. Install the negative battery cable. Refer to Battery Negative Cable Replacement.