Removal Procedure
- Remove the engine mount. Refer to
Engine Mount Replacement - Left Side.
- Remove the engine mount bracket bolts.
- Remove the engine mount bracket.
Installation Procedure
- Position the engine mount bracket onto the frame.
- Perform the following steps prior to installing the engine mount bracket bolts.
• | Remove all traces of the original adhesive patch. |
• | Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry. |
• | Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts. |
Caution: Refer to Fastener Caution in the Preface section.
- Install the engine mount bracket bolts.
Tighten
Tighten the bolts to 65 N·m (48 lb ft).
- Install the engine mount. Refer to
Engine Mount Replacement - Left Side.