Rear Seat Recliner Actuator Replacement. Chevrolet Tahoe

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Tahoe - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear Seat Recliner Actuator Replacement

Rear Seat Recliner Actuator Replacement with Bucket Seat

Callout	Component Name
Caution: Refer to Fastener Caution in the Preface section. Preliminary Procedures Fold the seat forward. Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement.
1	Rear Seat Recliner Actuator Screw (Qty: 2) Tighten 3 N·m (25 lb in)
2	Rear Seat Recliner Actuator Assembly Tip Disconnect the electrical connector. Disconnect the actuator cable assembly.

Callout

Component Name

Caution: Refer to Fastener Caution in the Preface section.

Fold the seat forward.
Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement.

Rear Seat Recliner Actuator Screw (Qty: 2)

Tighten
3 N·m (25 lb in)

Rear Seat Recliner Actuator Assembly

Tip

Callout	Component Name
Caution: Refer to Fastener Caution in the Preface section. Preliminary Procedures Fold the seat forward. Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement. Tip The 60 percent seat is shown, the 40 percent seat is similar.
1	Rear Seat Recliner Actuator Screw (Qty: 2) Tighten 3 N·m (25 lb in)
2	Rear Seat Recliner Actuator Assembly Tip Disconnect the electrical connector. Disconnect the actuator cable assembly.