GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Tahoe - 2WD 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Insulator Replacement

Stabilizer Shaft Insulator Replacement 1500


Object Number: 1864816 Size: SF

Callout

Component Name

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement.

1

Stabilizer Shaft Clamp Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Stabilizer Shaft Clamp

3

Stabilizer Shaft Insulator

Tip
Ensure that the slit in the stabilizer shaft insulator is installed toward the rear of the vehicle.

Stabilizer Shaft Insulator Replacement 2500


Object Number: 1865485 Size: SF

Callout

Component Name

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement.

1

Stabilizer Shaft Clamp Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Stabilizer Shaft Clamp

3

Stabilizer Shaft Insulator

Tip
Ensure that the slit in the insulator is facing the front of the vehicle when installed.