Front Axle Lubricant Level Inspection 8.25 Inch Axle
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Make sure the vehicle is level.
- Inspect the front axle for leaks. Repair as necessary.
- Clean the area around the front axle fill plug.
- Remove the front axle fill plug (1).
- Inspect the oil level.
Specification
The 8.25 inch axle the oil level should be between 12-16 mm (0.50-0.625 in) below the fill plug opening.
- If the level is low, add oil until the level is between 12-16 mm (0.50-0.625 in) for the 8.25 inch axle. Use the correct fluid. Refer to
Adhesives, Fluids, Lubricants, and Sealers.
Caution: Refer to Fastener Caution in the Preface section.
- Install the fill plug and tighten to
33 N·m (24 lb ft).
- Lower the vehicle.
Front Axle Lubricant Level Inspection 9.25 Inch Axle
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Make sure the vehicle is level.
- Inspect the front axle for leaks. Repair as necessary.
- Clean the area around the front axle fill plug.
- Remove the front axle fill plug (1).
- Inspect the oil level.
Specification
The 9.25 inch axle the oil level should be between 0-6 mm (0-0.25 in) below the fill plug opening.
- If the level is low, add oil until the level is between 0-6 mm (0-0.25 in) for the 9.25 inch axle. Use the correct fluid. Refer to
Adhesives, Fluids, Lubricants, and Sealers.
Caution: Refer to Fastener Caution in the Preface section.
- Install the fill plug and tighten to
33 N·m (24 lb ft).
- Lower the vehicle.