Preliminary Procedures

1. Lower the front side door window to the fully down position.
2. Tape off the lower window frame to prevent damage to the door.
3. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
4. Remove the outside mirror. Refer to Power Mirror Replacement .
5. Remove the inside door frame garnish molding.

1

Front Side Door Window Reveal Molding Retainer (Qty: 13)

Tip
If reusing the window reveal molding replace the clips.

2

Front Side Door Window Reveal Molding

Tip

1. Install the reveal molding into the window opening by inserting the bottom edge of the molding through the belt opening of the door. Allow the integral fasteners and clips to clear the door frame.
2. Use care not to scratch the paint.
3. Fully seat the molding onto the belt flange between the corners. Ensure that the lower attachment clips are aligned the holes in the door frame.
4. Install the remaining clips around the window flange.