GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Tahoe - 2WD 🢒 Transmission 🢒 Automatic Transmission - 2ML70 🢒 Automatic Transmission Range Selector Lever Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1970183 Size: SH
  2. Remove the range selector lever cable heat shield bolts (1).
  3. Remove the range selector lever cable heat shield (2).

    4. Object Number: 1970184 Size: SH
  4. Disconnect the range selector lever cable (2) from the range select lever.
  5. Remove the range selector lever cable retainer (1).
  6. Remove the range selector lever cable (2) from the cable bracket.

    7. Object Number: 1970155 Size: SH
  7. Remove the range selector lever nut (1).
  8. Remove the range selector lever (2).

Installation Procedure

    Object Number: 1970155 Size: SH
  1. Install the range selector lever (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the range selector lever nut (1).

    3. Tighten
    Tighten the nut to 25 N·m (18 lb ft).


    Object Number: 1970184 Size: SH
  3. Install the range selector lever cable (2) to the cable bracket.
  4. Install the range selector lever cable retainer (1).
  5. Connect the range selector lever cable (2) to the range select lever.

    6. Object Number: 1970183 Size: SH
  6. Install the range selector lever cable heat shield (2).
  7. Install the range selector lever cable heat shield bolts (1).

    8. Tighten
    Tighten the bolts to 17 N·m (13 lb ft).

  8. Lower the vehicle.