GM Service Manual Online
For 1990-2009 cars only

Object Number: 1843603  Size: MF

Callout

Component Name

Preliminary Procedure

    • Ensure the bearings are installed squarely on the front output shaft.
    • Using a suitable adapter and an arbor press, remove the bearing assemblies from the front output shaft.

1

Transfer Case Front Output Shaft Rear Bearing Assembly

Tip
Using a suitable adapter and an arbor press, install the bearing until the bearing bottoms against the spacer.

2

Transfer Case Front Output Shaft Front Bearing Assembly

Tip
Using a suitable adapter and an arbor press, install the bearing until the bearing bottoms on the front output shaft.

3

Transfer Case Front Output Shaft Hole Plug

Tip

    • Using a suitable adapter and an arbor press, remove the front output shaft hole plug by going through the front of the front output shaft.
    • Install the plug using the large side of the DT-48212 bearing installer .
    • Press the plug until the tool bottoms on the front output shaft.

Special Tools

    • DT-48212 Input Shaft Pilot Bearing Installer
    • J 8092 Universal Driver

For equivalent regional tools, refer to Special Tools.