GM Service Manual Online
For 1990-2009 cars only

Object Number: 1849361  Size: MF

Callout

Component Name

1

Transfer Case High/Low Shift Fork Pin

Tip
Drive the pin out using a drift punch and hammer.

2

Transfer Case High/Low Shift Fork

Tip
Inspect for wear or damage in the spring seat locations. The component must be replaced if damage is found.

3

Transfer Case High/Low Shift Fork Spring Assembly

Tip
The component must be replaced if the following conditions exist:

    • The cam lobes are worn or rough
    • The spring is broken

4

Transfer Case Two/Four Wheel Drive Actuator Cam Retaining Ring

5

Transfer Case Two/Four Wheel Drive Actuator Cam Spacer

6

Transfer Case Two/Four Wheel Drive Actuator Cam

7

Transfer Case High/Low Shift Fork - Service - Pin

Tip

    • Apply a small amount of threadlock GM P/N 12345493 (Canadian P/N 10953488), or equivalent, to the shaft of the pin before installation.
    • Press the pin into the control actuator shaft using a brass drift until bottom.

8

Transfer Case Shift Fork Shaft Guide Screw

Caution: Refer to Fastener Caution in the Preface section.

Tip
Apply threadlock GM P/N 12345493 (Canadian P/N 10953488), or equivalent, to the screw threads.

Tighten
5 N·m (44 lb in).